Helibug Spark

Whats New

Core7 for Open-Source

Check out our new Gasser Conversion for Trex700. Core7 uses Stock Zenoah Clutch, HPI Clutch Bell and HPI Clutch Carrier

Current News

Helibug Open-Source

New Concept in Gasser Conversions. Based on Trex700, module oriented Gasser conversion made to utilitize Gasbug based modules as power source.

Coming Soon

Helibug Finch X4

Finch X4 Gasbug Module for Helibug Open-Source.

Helibug Spark Gasser Conversion for MA Stratus

Helibug Spark for MA Stratus

Gasser Conversion kit using Zenoah RC Engine

Designed to convert MA Stratus to use Zenoah RC Series of Engines

 

Engine Mounts Backwards
Just like SPARK for Spectra-G, this conversion kit is designed to be plug-and-play !
Simple conversion steps uses all stock parts including the stock carbon side frames from Stratus
without even the need to rebuild the whole helicopter
Conversion process can be completed in less than an hour by just removing the helicopter from
the base plate and installing it to the Helibug Spark for Stratus
CNC machined Aluminum parts
Backward engine mounting
Choose the power you want using the right RC Engine for your application, from G230RC to G290RC or the big bore 30.5cc
RC Engines are known to run much smoother out of the box compare to the PUH Series
and require much less maintenance
Slotted base plate design for the Stock Stratus frame columns for any available gear ratio you use
Get the best out of Stratus using Helibug Spark ! 

Kit Contents
1. Base plate
2. Single Piece Clutch Mount w/ screw
3. 2x Engine Top Mounts with required screws

Required Part from Spectra-G:
1. Single Column with a hole for Spark Plug
(this can be skipped if you are willing to cut the link in the stock column to make an opening for the Spark plug - Please check the pictures below)

---

Conversion Step Reference

 

Conversion process is almost identical to Helibug SPARK for Spectra-G,

Except addition of throttle mount plate

(Please check Conversion Steps Pictures from SPARK for Spectra-G for Detailed Installation)

 

Throttle Servo Mount Plate Location

 

You will either need to buy one of the column from Spectra-G or Modify the one from Stratus to make space for Spark Plug wire - Your Choice